|
Full
product list
HTML (500KB) |
Plain
text file
(150-200KB) |
|||
| Notes :(1) All prices are subject to change without notice and do include GST but not freight charges. (2) Minimum web order value is $10.00, minimum freight charge is $10 (ie. $20 total) | ||||
OZGEAR CLEARANCE PAGES INDEX |
| AMIDON TOROIDS: 1 ANTENNA MOUNTING: 1 -:- ANTENNAS: 1 -:- CB ACCESSORIES: 1 -:- CB TRANSCEIVERS: 1 -:- COAX CONNECTORS: 1 -:- GPS ACCESSORIES: 1 -:- ICOM: 1 -:- MISCELLANOUS: 1 -:- MODEMS - ADSL: 1 -:- OZGEAR: 1 -:- SANGEAN: 1 -:- TIGERTRONICS: 1 -:- TV ACCESSORIES: 1 -:- UNIDEN: 1 -:- WEATHER STATIONS: 1 -:- YAESU: 1 -:- ACCESSORY ITEMS: 1 -:- ADAPTERS: 1 -:- ALARMS: 1 -:- BATTERIES: 1 -:- BATTERY HOLDERS: 1 -:- BOXES ABS: 1 -:- BOXES DIECAST: 1 -:- BOXES POTTING: 1 -:- BRACKETS: 1 -:- BREADBOARDS: 1 -:- CABLE ENTRY: 1 -:- CABLES: 1 2 -:- CAPACITORS: 1 2 -:- CAPACITORS SILVER MICA: 1 -:- CAPACITORS SMD: 1 -:- CAR POWER: 1 -:- COMPUTER: 1 -:- CONNECTORS: 1 2 3 4 -:- CONNECTORS-CABLES: 1 -:- CRYSTALS-RESONATORS: 1 -:- DIODES: 1 -:- ENTERTAINMENT: 1 -:- FANS: 1 -:- FEET: 1 -:- FETS: 1 -:- FUSEHOLDERS: 1 -:- FUSES: 1 2 -:- GLOBES: 1 -:- HEATSINKS: 1 -:- ICS DIGITAL: 1 -:- ICS LINEAR: 1 -:- ICS PICAXES: 1 -:- INDUCTORS-FERRITES: 1 -:- INSULATORS-PACKS: 1 -:- KITS: 1 -:- KNOBS: 1 -:- LEDS: 1 -:- METERS-TEST EQUIPMENT: 1 -:- MICROPHONES: 1 -:- OPTOS: 1 -:- PA SYSTEMS: 1 -:- PIEZO: 1 -:- POWER SUPPLIES: 1 -:- REGULATORS: 1 -:- RELAYS: 1 -:- RESISTORS: 1 2 -:- RESISTORS SMD: 1 -:- SECURITY: 1 -:- SPEAKERS: 1 -:- SWITCHES: 1 2 -:- TOOLS: 1 -:- TRANSFORMERS: 1 -:- TRANSISTORS: 1 -:- TV ACCESSORIES: 1 -:- VARIABLE RESISTORS: 1 -:- WIRE: 1 -:- ZENERS: 1 |
| OZC0160 -:- C0160 - MICROPHONE INSERT ELECTRET OMNI 6MM OZC0160: Omni-directional 6mm Microphone Insert :- Electret mic insert for replacing broken units or building into audio equipment. Specifications Polar Pattern: Omni-directional Current Drain: 0.8mA max. Impedance: 1k Ohm, ±30% Sensitivity: -64dBm ±3dB Frequency Response: 50Hz-13kHz Dimensions: 6Ø x 5.2mm |  | Pricing (each): List: $ 3.30 Ours: $ 2.50 Qty available : 10 |  |
| OZC0170 -:- C0170 - MICROPHONE INSERT ELECTRET OMNIDIR OZC0170: Omni-Directional Electret Microphone Insert :- Polar Pattern: Omni-directional Current Drain: 0.8mA max. Impedance: 1k Ohm, ±30% Sensitivity: -55dBm ±3dB Frequency Response: 20Hz-10kHz Dimensions: 10Ø x 10mm Electret mic insert for replacing broken units or building into audio equipment. |  | Pricing (each): List: $ 2.90 Ours: $ 2.20 Qty available : 8 | |
| OZC0171 -:- C0171 - MICROPHONE INSERT ELECTRET OMNI-61DB OZC0171: Omni-directional 61db Electret Microphone Insert :- Specifications Polar Pattern: Omni-directional Current Drain: 0.8mA max. Impedance: 1k Ohm, ±30% Sensitivity: -61dBm ±3dB Frequency Response: 20Hz-10kHz Dimensions: 10Ø x 10mm |  | Pricing (each): List: $ 2.90 Ours: $ 2.20 Qty available : 10 | |
| OZC0173 -:- C0173 - ELECTRET MIC INSERT-60DB 120MM LEADS: Electret Mic Insert with Fly Leads :- Electret mic insert for replacing broken units or building into audio equipment. Specifications Polar pattern: Omni-directional Current drain: 0.8mA max. Impedance: 1kOhm, ±30% Sensitivity (C 0173): -60dBm ±3dB Freq response: 50Hz-13kHz | Pricing (each): List: $ 2.30 Ours: $ 1.70 Qty available : 9 | | |
| OZC0175 -:- C0175 - MICROPHONE HOLDER FOR ELECTRET MIC OZC0175: Holder For Electret Microphone :- Rubber boot Suits C 0170 and C 0171 |  | Pricing (each): List: $ 1.00 Ours: $ 0.75 Qty available : 20 | |
| OZC0330A -:- C0330A - MICROPHONE CURLY CORD - 4CONDUCTOR/2SHIELDED OZC0330A: 4 Conductor 2 Shield Microphone Curly Cord :- 4 core shielded lead extends to asymp;1.5m fully stretched. Has 2 shielded leads for the mic insert and two leads for PTT function. |  | Pricing (each): List: $11.50 Ours: $ 8.60 Qty available : 3 | |
| OZC0337 -:- C0337 - WINDSOCK 12MM SUIT LAPEL MIC OZC0337: 12mm Lapel Microphone Windsock :- Used to negate breath noise and eliminate wind or breath "pop". This windsock is designed specifically to suit our lapel microphone and is sold as both a spare part and as a generic unit. |  | Pricing (each): List: $ 2.50 Ours: $ 1.90 Qty available : 5 | |
| OZC0344 -:- C0344 - WINDSOCK BALL MICROPHONE 40MM OZC0344: 40mm Ball Microphone Windsock :- Used to negate breath noise and eliminate wind or breath 'pop' |  | Pricing (each): List: $ 3.20 Ours: $ 2.40 Qty available : 1 | |
| OZC0400 -:- C0400 - MICROPHONE HOLDER CROSSBAR-3MICS: 3 Microphone Holder Crossbar :- Adapts a single mic stand head to three mounting points. eg. May be used to mount three microphones on a single mic stand. Standard 5/8" thread. Useful for recording in stereo. |  | Pricing (each): List: $13.80 Ours: $10.40 Qty available : 1 | |
| OZC0402 -:- C0402 - MICROPHONE HOLDER 22MM OZC0402: Mic Holder 22mm Flexible. :- Designed to suit narrow bodied hard wired mics. Uses standard 5/8" thread to enable direct fitting to most mic stands and goosenecks. Features flexible plastic to allow the accommodation of a variety of microphone sizes. |  | Pricing (each): List: $ 7.00 Ours: $ 5.30 Qty available : 1 | |
| OZC0410 -:- C0410 - MICROPHONE GOOSENECK EXT 300MM NAT OZC0410: 330mm Natural Gooseneck Microphone Extension :- Microphone gooseneck incorporating 5/8” thread male to female. Matching bench mount bases C 0420/21. 300mm Chrome. |  | Pricing (each): List: $12.00 Ours: $ 9.00 Qty available : 1 | |
| OZC0412 -:- C0412 - MICROPHONE GOOSENECK EXT 450MM NAT OZC0412: 450mm Natural Gooseneck Microphone Extension :- Microphone gooseneck incorporating 5/8” thread male to female. Matching bench mount bases C 0420/21. 450mm Chrome. |  | Pricing (each): List: $14.50 Ours: $10.90 Qty available : 1 | |
| OZC0420 -:- C0420 - MICROPHONE GOOSENECK BASE NATURAL OZC0420: Natural Gooseneck Microphone Base :- Has a 5/8" male thread one end and 5/8" female thread other end. Screws included. Chrome base |  | Pricing (each): List: $ 3.90 Ours: $ 2.90 Qty available : 2 | |
